How to Clean Your Bricks & Pavers

by Using either Wet & Forget® or Rapid Application®

Cleaning Bricks Pavers and Concrete with Rapid Application or Wet & Forget_1
IMPORTANT:
You cannot use regular Wet & Forget (blue) with the Rapid Application Reach Nozzle.  It will not work because
  • While the active ingredients are the same, the dilution rates are different
  • But your coverage of 100-300m2  is exactly the same for both products 
  • Common average coverage is about 100-150m2 on these porous surfaces

 Rapid Application®

Clean Your Bricks and Pavers with our Revolutionary Reach Nozzle

  1. Attach your hose, turn to ON and off you go!
  2. No mixing!  No measuring!  No mess!
  3. Choose a cool, dry day to apply it.
  4. Saturate the dry surface you are cleaning with the Rapid Application®
  5. NO rain for the first 5 hours - Then, just watch it come cleaner - bit by bit
  6. Only one application! (except in extreme cases of heavy contamination)

 

Rapid Application Cleans Bricks Concrete & Pavers

 Wet & Forget®

Clean Your Bricks and Pavers with 

  1. Mix it up 1 to 5 in your garden sprayer. Choose a cool, dry day to apply it.
  2. Saturate the dry surface you are cleaning with the Wet & Forget
  3. No rain for the first 5hours - Then, just watch it come cleaner - bit by bit
  4. Only one application! (except in extreme cases of heavy contamination)
  5. You can use it safely on ANY exterior surface because there is NO BLEACH in our product
  6. NO BLEACH means an unlimited shelf life
  7. Contains a special surfactant to give a more even dispersal. It also helps product grip onto vertical surfaces

 

Wet & Forget Cleans up Bricks, Pavers & Concrete

 

 Cleaning Bricks Pavers and Concrete with Rapid Application or Wet & Forget_2

Helpful Hints:

  • Total saturation of the surface with this product is essential in order to obtain a good kill of the fungi, algae, lichen, moss & algae which infests these surfaces.
  • Make sure the surface is dry in order to get the best penetration of the growth with the least amount of evaporation.
  • If the surface is particularly bad, apply again one month after the first application. Allow the surface to weather naturally and nature will take its course.
  • The growth decomposes while the rain gently removes them from the surface over time.
  • After 1st application use as a maintenance tool. Only re-apply at the first sign of regrowth.

Don't Worry if Your Pavers Go Brown After Spraying With Wet & Forget