How to Clean Your Bricks & Pavers

Use either Wet & Forget® or Rapid Application®
Cleaning Bricks Pavers and Concrete with Rapid Application or Wet & Forget_1Cleaning Bricks Pavers and Concrete with Rapid Application or Wet & Forget_2

IMPORTANT:
You cannot use regular Wet & Forget (blue) with the Rapid Application Reach Nozzle.  It will not work because

  • While the active ingredients are the same, the dilution rates are different
  • But your coverage of 100-300m is exactly the same for both products 
  • Common average coverage is about 100-150mon these porous surfaces

Clean Your Bricks & Pavers with Rapid Application®

  • Use our Revolutionary Reach Nozzle
  • Attach your hose, turn to ON and off you go!
  • No mixing!  No measuring!  No mess!
  • Choose a cool, dry day to apply it.
  • Saturate the dry surface you are cleaning with the Rapid Application®
  • NO rain for the first 5 hours - Then, just watch it come cleaner - bit by bit
  • Only one application! (except in extreme cases of heavy contamination)

Rapid Application Cleans Bricks Concrete & Pavers

 Clean Your Bricks and Pavers with Wet & Forget®

  • Mix it up 1 to 5 in your garden sprayer. Choose a cool, dry day to apply it.
  • Saturate the dry surface you are cleaning with the Wet & Forget
  • No rain for the first 5 hours - Then, just watch it come cleaner - bit by bit
  • Only one application! (except in extreme cases of heavy contamination)
  • You can use it safely on ANY exterior surface because there is NO BLEACH in our product
  • NO BLEACH means an unlimited shelf life
  • Contains a special surfactant to give a more even dispersal. It also helps product grip onto vertical surfaces

Wet & Forget Cleans up Bricks, Pavers & Concrete

Cleaning Bricks and Pavers is Easy with Wet & Forget Products

    Helpful Hints When Cleaning Your Bricks or Pavers:

    • Total saturation of the surface with this product is essential in order to obtain a good kill of the fungi, algae, lichen, moss & algae which infests these surfaces.
    • Make sure the surface is dry in order to get the best penetration of the growth with the least amount of evaporation.
    • If the surface is particularly bad, apply again one month after the first application. Allow the surface to weather naturally and nature will take its course.
    • The growth decomposes while the rain gently removes them from the surface over time.
    • After 1st application use as a maintenance tool. Only re-apply at the first sign of regrowth.

    Don't Worry if Your Pavers Go Brown After Spraying With Wet & Forget